In order to promote the international communication and development on solar energy materials and high-efficiency photovoltaic devices between SWPU and Jülich Research Centre, SWPU has decided to hold the Sino-German Photovoltaic Forum – Symposium on High Efficiency Silicon Solar Cells and Perovskite Tandem Technologies on May 25, 2018. The arrangement is as follows:
I. Academic events
Time: May 25th, 2018
Location: Library Academic Hall
14:10-14:30 |
Research Activities at Institute of Photovoltaics |
Dr. Tao Chen, Head of High Efficiency Silicon Solar Cells Platform (IPV) |
14:30-14:50 |
Silicon Heterojunction Solar Cell Activities at Institute of Energy and Climate Research 5 – Photovoltaics |
Dr. Kaining Ding,Head of Silicon Heterojunction Materials and Solar Cells Group (JUELICH) |
14:50-15:10 |
Interface Engineering of Perovskite Solar Cells |
Dr. Zhu Ma, Team leader of PSCs (IPV) |
15:10-15:30 |
Silicon Heterojunction Solar Cell Baseline at IEK-5 Photovoltaics |
Dr. Andreas Lambertz,Team leader SHJ baseline and infrastructure (JUELICH) |
15:30-15:50 |
An effective corrosion inhibitor for sweet corrosive media |
Dr. Ambrish Singh (Southwest Petroleum University) |
15:50-16:10 |
Perovskite/SHJ Tandem solar cell applying nc-SiOx:H interlayer |
Dr. Wei Qin,Senior scientist for Perovskite/SHJ Tandem solar cells (JUELICH) |
16:10-16:30 |
Microcrystalline silicon carbide and catalytic doping by hot wire chemical vapor deposition |
Dr. Manuel Pomaska,Team leader hot wire CVD processes and passivated contact (JUELICH) |
16:30-16:50 |
The Optimization of SnO2Based Perovskite Solar Cells |
Mr. Liuwen Tian, (IPV) |
16:50-17:10 |
Nano-imprinted light trapping structures for SHJ solar cells |
Dr. Alaaeldin Gad,Team leader IBC-SHJ and light management (JUELICH) |
II. Open events on the Photovoltaic Day
In order to stimulate SWPU students’ interest in the new energy specialization, laboratories are open to all faculties and students with introduction to the research, teaching and industrialization of the IPV.
Time: May 24, 2018 14:30-17:30
Location: Yifu Engineering Training Center, Area C, 2nd Floor